Replacing the Toner Cartridge
07SE-0FJ
When there is only a small amount of toner remaining inside the machine, a message appears on the touch panel display. You can continue printing, but at this time you should purchase a new toner cartridge to have it available when needed.
When all of the toners run out completely and prints can no longer be made, a screen with instructions on how to replace the toner cartridge appears on the touch panel display. Follow the procedure described below to replace the toner cartridge.
If you press [Close], you can continue operations, such as setting modes and scanning originals, even if you do not replace the toner cartridge immediately.
1.
Press [
].
NOTE
|
If the Black toner or all of the toners run out, this step is not necessary.
|
2.
Remove the displayed color's toner cartridge.
|
1. Open the front cover of the main unit.
|
2. Completely open the cover for the toner cartridge to replace.
|
3. Pull out the toner cartridge.
Pull the toner cartridge out halfway, and then remove it completely while supporting it and keeping it straight with your other hand from underneath.
|
WARNING
|
Do not burn or throw used toner cartridge into open flames, as this may cause the toner remaining inside the cartridges to ignite resulting in burns or a fire.
|
IMPORTANT
|
Do not touch the tip of the toner cartridge or subject it to shock by hitting it. Doing so may cause the toner cartridge to leak.
|
3.
Prepare the new toner cartridge.
|
1. Open a package containing the indicated color's toner cartridge, and remove the toner cartridge.
|
|
2. Hold the new toner cartridge in both hands, as shown on the left, and gently tilt it several times.
|
|
3. Remove the protective cap from the new toner cartridge.
Twist the protective cap of the new toner cartridge in the direction of the arrow to remove it.
|
4.
Insert the new toner cartridge.
|
1. Align the arrow on the ring near the end of the new toner cartridge with the arrow on the toner inlet of the machine, as indicated in the diagram.
|
2. Push the new toner cartridge in as far as possible.
|
NOTE
|
Support the new toner cartridge with your hand from underneath while pushing it into the machine with your other hand.
|
5.
Close the covers.
|
1. Close the cover for the toner cartridge you replaced.
|
2. Close the front cover of the main unit.
|
CAUTION
|
When closing the covers, be careful not to get your fingers caught, as this may result in personal injury.
|